|
 Our
most versatile Series 2400 receiver, the 2422 Receiver is designed to
handle materials ranging from free-flowing granulars to difficult-to-discharge
fine powders. It features a steepsided hopper and powered gate for complete
material discharge, large filter area for fine powders, and is available
in a choice of carefully selected materials and finishes. The unit is
designed to make disassembly for cleaning and maintenance easy.
Industry
Applications
Compounding Industry
The compounding industry uses the 2422 Receiver to convey difficult-to-handle
and abrasive additives, fillers and compounds. The unit’s large filter
area separates the very fine powders while the 77°, steep-sided hopper
prevents material from clinging to the hopper walls. The 2422’s center
entry with baffle also reduces hopper wear that can result from conveying
materials with some abrasive qualities.
Features:
Materials
of construction
The 2422 Receiver is available in 316 and 304 stainless
steel or epoxy-coated carbon steel for applications requiring specific
materials of construction to meet the demands of abrasion resistance,
sanitary conditions, or a corrosive environment. Welds can be ground smooth
or flush. Interior and exterior surfaces of stainless steel units can
be bead-blasted and/or electropolished for superior performance and appearance.
Simplified
installation
To simplify receiver installation, the hopper section has three support
arms which allow the unit to be anchored to the floor, ceiling, or a machine.
The air control valve is also attached with a quick-release band clamp
to allow easy alignment with the vacuum airline.
Discharge
gate
The powered 12-inch gate ensures material discharge
even when the product is not heavy enough to open the gate by gravity.
It also lets the 2422 Receiver be used in applications where material
needs to be dumped on demand and not on a “keep full” basis.
A nonpowered gate is also available for less demanding applications.
Level sensing
indicator
A capacitance or paddle-style level indicator to
sense the level of material in the hopper below the receiver is an available
option.
 
For more information,
contact
Premier.
2422 Receivers
Dimensional Information and Features
For more
information, contact
Premier.
If you need the free Acrobat Reader, click
here.
|
 Quick
disassembly for cleaning
To provide quick access for receiver cleaning or maintenance
and to accommodate contaminationsensitive applications, the discharge
gate, inlet adapter, and center filter body section are all attached to
the hopper with quick-release band clamps. This lets the unit be easily
disassembled and reassembled without tools.
 Solid-state
controls
The receiver controls are solidstate and are available in a NEMA 4, NEMA
7, or NEMA 9 enclosure. The receiver control commands the functions of
the discharge gate, filter pulse cleaning, level indicator, vacuum valve,
and inlet selection for those units equipped with dual inlets. All solenoids
are located in the enclosure, pre-wired, requiring only that the supplied
air hose be connected between the enclosure and receiver at the time of
installation.
|
